Model Number: US-1513
Brand Name: OEM
Key Specifications/Special Features:
Product: This product consists of one transmitter and one socket receiver.Installation: Install one (1) x12V (23A) battery in the compartment, make sure the installation of battery is correct.Operation:
The outlets can be manually operated or via the handy remote control.
There is a built in auto-switch off mechanism to save power.
It stays off mode after power off, even after power comes again to avoid waste
Changingthe battery: Regularly change the battery in the remote control for best use – however if you find the receivers are not responding or the indicator light becomes dim then you must change the battery at the earliest available time.
Alwaysdispose ofold batteries with consideration for the environment.
Features：
- Multi-integrated IC and high frequency coding system
- Low energy consumption
- Able to resist high levels of interference and barriers such as walls and glass.
- Durable and stable operation
- After power-off, it stays OFF mode when power comes again to avoid waste.
- Can be used for a wide variety of appliances such as Lights, Fans, TV’s, Coffee Machines, AC-Heaters and refrigerators etc.
- For Indoor Use only
| Technical data |
| number |
name |
details |
| 1 |
Working Voltage for socket |
120V~/60Hz |
| 2 |
Transmission frequency |
433.92MHz |
| 3 |
Max.load current |
10A |
| 4 |
Power for transmitter |
DC12V 23A battery |
| Detailed Self- Learning Operation |
All remote controlled socket units have been pre-programmed and can be used immediately.
To re-program the remote control transmitter and socket receiver, please follow instructions below.
- Plug the remote controlled socket to a power point and turn the power on.
- Press and hold the learning button on the right and side of the socket receiver for about 5 seconds till the LED indicatorflashes.
- Release the learning button and press the preferred “on”or “off”number button of the transmitter.
- Programming successful when the LED indicator stops flashing.
- The remote controlled socket is now ready to use.
- Remote set up only requires one-time programming.
|
| Change the battery |
| Regularly change the battery in the remote control for best use – however if you find the receivers are not responding or the LED indicator of remotecontrol becomes dim, then you must change the battery at the earliest available time. Alwaysdispose ofold batteries with consideration for the environment. |
| NOTES |
- Make sure the battery and socket installation is firm, safe and correct.
- For indoor use only, it should be installed in the places of aeration and far from high-temperature source. Make sure to avoid strong sunlight, raining and moisture places
- Do not exceed the maximum load current.
|
|
By certification [File Integrity]
