Paper Drinking Straw Machine

Application: 

Paper drinking straw machine working principle and short introduction：

Winding different layers paper strip into paper tube with glue.

This kind of drinking straw machine adopt multi-cutting knife system, by servo tracking, cut paper tube into small piece of paper drinking straws.

Raw Material is food grade white craft paper and food grade glue.

Sub-raw material such like oil for lubrication and cooling. White mineral oil.

Standard electric power: 380V/ 3phase/ 50Hz, could change by special requirement

Electric consumption: Rated power, 6.15KW/h

FLA( Full load amp): 13.5A

Capacity:

How many pieces straw per minute. For example: 40m/min, making 6*197mm straws. Consider some waste, we use 225mm for calculating. 40*1000/200=200pcs/minute.

How to judge the output speed: For 6 cutting blade model, 50m/min output speed, 5*197=985mm, nearly 1 meter. The cutting system need drop off nearly 50 times per minute in videos.

U could set total paper tube length in panel. 5*197=985mm. When paper tube arrives 985mm, the cutting blade drop down and cut into straws. It’s better to set 1000mm for paper tube length, waste a little at end to make last straw the same length with other straws.

Remark:

The speed above is paper tube output speed, not paper feeding speed. Some company use paper feeding speed to attract customer on YouTube.

To get a good quality and stable & no stop working, we suggest use a slower speed.

Specifications:

Machine parts：

6 set cut knife

Glue device

Paper frame

Samples：

http://www.anbomachine.com/